INICORE    
   
ABOUT US NEWS DESIGN SERVICES PRODUCTS JOBS CONTACT HOME
         
 
CANmodule-IIx - FIFO based CAN Controller

CANmodule-IIx is a full functional CAN controller module that contains advanced message filtering, and receive-, and transmit buffers. It is designed to provide a low gate-count CAN interface for FPGA and ASIC based system-on-chip (SOC) integrations.

Full message filtering together with a transmit FIFO and a high priority transmit message buffer support a wide range of applications. An AMBA Advanced Peripheral Bus (APB) interface enables smooth integration into ARM based SOC’s.

Block Diagram

Features

Standard Compliant
  • Full CAN 2.0A/B compliant
  • ISO 11898-1 compatible
  • Supports standard CAN baud rates including 1 Mbps
Receive Path
  • 3 fully programmable message filters
  • Each message filter covers: ID, IDE, RTR, data byte 1 and data byte 2
  • 32 messages deep receive FIFO
  • FIFO status indicator
  • Message received time-stamp
Transmit Path
  • 16 messages deep transmit FIFO
  • 1 message buffer for high priority messages to bypass transmit FIFO
  • Message Arbiter
System Bus Interface
  • AMBA 2.0 Advanced Peripheral Bus Interface
  • Other bus interfaces available upon request
  • 8-bit, 16-bit, or 32-bit wide data path
  • Status and configuration interface
Programmable Interrupt Controller
  • Local interrupt controller covering message and CAN error sources
Target for FPGA Implementations
  • Supports FPGA systems with two clock domains
  • System clock (fast clock)
  • CAN clock (slow clock, multiple of 8MHz)
Test and Debug Support
  • Listen only mode
  • Internal loopback mode
  • External loopback mode
SRAM Based Message Buffers
  • Optimized for low gate-count implementation
  • 100% Synchronous Design

Implementation Options

The core can be configured for your application to get a gate-count optimized implementation:

  • Configurations readback enable
  • Separate clock domains for CAN and system clock
  • Fixed CAN configuration
  • Selectable number of message filters: 0, 1, 2, or 3
  • Data bus width: 8, 16, or 32-bit

Documentation

CANmodule-IIx data sheet